pp724e3be9.png
ppbf038798.png
Not sure which crib rod your crib will need?

Follow these steps:
1.  Match any of the original rod/s (if available) with our photos.  Note: look at the top of the rod to determine if your rod type is offset top, square top or candy cane top.

2.  Call Products America when you are with the crib at 800.205.9642 or 800.772.1041.  Our CSR staff is comprised of hardware experts, who will ask you specific questions about your crib in order to determine the correct replacement hardware needed.  We may also ask you to measure a few specific items, so please try to have a tape measure nearby when you call.
pp866127c5.png
ppda8a8b48.png
pp6d6ae372.png
The distance from the hole where the top of the crib rod will attach to the lowermost guide angle on the leg of the crib for the crib rod to travel through is called the “crib rod dimension” or “CRD”.  
pp7c33f773.jpg
pp578d2381.png
ppa9f0c581.png
Fig. A
pp6062fb69.png
ppa7016115.png
Fig. A
The distance from the hole where the top of the rod will attach to the top of the crib leg (do not include decorative molding) is called the maximum neck dimension.
pp65707708.png
pp28c57305.png
Fig. A
?
pp946d52e6.png
ppbe81d670.png
pp54328a8f.png
Fig. B
ppe3623bc7.png
ppf8e2c67b.png
Fig. B
ppdad1bc21.png
ppc69bfdfc.png
Fig. B
Fig. B
The distance from the wood of the crib to the center of the hole in the rod support angle is called the offset dimension.