“The Hardware Specialists”
STEALTH HARDWARE
PH64
Our lower guide pins. Two pins are required per moving side. Lower guide pins are attached to the headboard and footboard of the crib. The stealth tracks PH65L or PH65R buried in the moving side rail of the crib are designed to engage with these lower guide pins. Each PH64 attaches with one insert IN60, included. Available in pairs only.
PLEASE NOTE:
There are several different designs of stealth hardware used in the juvenile industry today, all of which are not interchangeable with each other. If you are not sure who manufactured your crib please review all photos for proper replacement selection. If you are building a crib, please call for stealth hardware kit quotes. For stealth kits click here. Our qualified customer service staff is standing by to help you with proper selection, pricing and ordering information at (800)205-9642 or (800)772-1041.
There are several different designs of stealth hardware used in the juvenile industry today, all of which are not interchangeable with each other. If you are not sure who manufactured your crib please review all photos for proper replacement selection. If you are building a crib, please call for stealth hardware kit quotes. For stealth kits click here. Our qualified customer service staff is standing by to help you with proper selection, pricing and ordering information at (800)205-
PH65L/PH65R
Our lower spring loaded tracks designed to engage with PH64 lower guide pins. Lower tracks are buried in the moving side rail of the crib. Two tracks are required per moving side, (one left and one right). Each tack attaches with two WS114, included. Available in sets of one left and one right track.
PH60 : STEALTH TYPE RELEASE SET
Our complete stealth hardware set. Includes all items necessary for a single moving side. Please note: Stationary side fasteners are not supplied in this kit, reference our fastener section for those needs. Supplied with all necessary attaching fasteners. This hardware is designed to be hidden within the moving side rail of the crib. Complete Kit for builders click here.
HINT:
Q: “How do I know if the stealth hardware on my crib matches the design of the plastic hardware pictured above?”
A: The guide pins and guide bushings should be located on the headboard and footboard of the crib. If the guide pins and guide bushings on your crib are installed into the side rail itself, it may require a different type of hardware than what is shown here. Call us at 800.205.9642 for direct assistance.
NOTE: Always make sure both ends are locked in the up position by pressing down on both ends of the top rail of drop side. If locked correctly, side will not drop. To release side rail, pull up on top rail near center then press in on lower rail in center with your knee. To lock into up position, simply pull up. You should hear a click.
PH61
T-Slot Groove
PH64
PH65R
PH65L
PH65R and PH65L are installed into side rail.
PRODUCTS AMERICA
General Info on PH60
Printable Document
Printable Document
Now available with metric attaching screws! Call us!