107 Allen Street
Bruceton, TN 38317
800.205.9642
Fax 800.273.6736
Contact Us
ppb0ecbac0.jpg
pp511d86e9.png
ppabe982b3.jpg
ppcfbd4e69.jpg
pp613e33a4.jpg
pp4f8119f0.png
“The Hardware Specialists”
products america
MATTRESS SPRINGS
BulC183.gif
BulC183.gif
pp73aa293c.png
MS45 or MS46
Our standard bolt in type mattress spring frame, designed to meet all current mandatory and voluntary safety standards. Available with or without the wrench and four screws to attach it to the crib headboard and footboard.
pped76fb5b.png
MS45
Definitions:
Hook Type  = Mattress Spring Frame that attaches to the crib headboard and footboard by hanging with hooks.
Bolt Type = Mattress Spring Frame that attaches to the crib headboard and footboard by bolting in screws.
pp07b6280b.png
Welcome to the mattress spring section of our online catalog.  All of our mattress springs are made of top quality angle iron and are available in several sizes.  Please call for direct assistance:
(800)205-9642 or (800)772-1041.
ppf47df5b6.png
General Information on Mattress Springs
Printable Document
ppd84d031e.png
ppa370196c.png
HINT:
Q: “How do I know if my crib uses a hook type or a bolt type mattress spring frame?
A: Check on the headboard or footboard for height adjustment brackets.  Refer to the photos below to identify the type of mattress spring frame that was used originally.
If you are not sure which type of mattress spring your crib requires please call Products America for direct assistance at (800)205-9642 or (800)772-1041.
Hook Type Handle Bracket
Hook Type Attachment Method
MS51  
Our special bolt in type mattress spring frame, designed to meet all current mandatory and voluntary safety standards. Available with or without the wrench and four screws to attach it to the crib headboard and footboard.
pp376460a6.jpg
Short End
ppe4246082.png
ppf5c98685.png
pp442a0f63.png
pp01593fbe.png
ppdc7df508.png
Bolt-<wbr>in Type Handle Bracket
pp33714b8f.png
pp3cab4aaf.png
PRODUCTS AMERICA
pdficon_large.gif
ppc9a4a07e.png
HINT:

Q: “What is the difference between the MS45 and the MS51 bolt type mattress springs?”

A: The difference is where the “arm” for bolt attachment is located. On the MS45, the arm is attached to the short ends of the spring frame.  On the MS51, the arm is instead located on the long sides of the spring frame.  This also affects where the mattress spring will attach on the headboard and footboard of the crib.  If you are unsure which type your crib requires please call:
(800)205-9642
for direct assistance.
General Info on
MS45 and MS51 Printable Document
pp3df4401b.gif
ppf440463e.png
pp536adf45.png
pp36f62ca3.png
pp92aade9e.png
ppac0a261e.png
If your crib has the “bolt” type brackets pictured to the right, it uses a bolt type mattress spring frame as pictured above or similar.  
OR