107 Allen Street
Bruceton, TN 38317
800.205.9642
Fax 800.273.6736
Contact Us
ppb0ecbac0.jpg
pp511d86e9.png
ppabe982b3.jpg
ppcfbd4e69.jpg
pp613e33a4.jpg
pp4f8119f0.png
“The Hardware Specialists”
products america
METAL HARDWARE: CRIB RODS
BulB365.gif
BulB365.gif
ppf1816f5f.jpg
CR711
Our standard notched square top crib rod.  This type of rod is used with a hand release system only. PLEASE NOTE: These rods are not left and right, they are not designed for use with the pull button hand release for drop sides. They are designed for use with hand releases such as the rocker lock design. Two rods are required for each moving side. Crib rods are supplied with all necessary attaching fasteners.
pp8a2bb84b.png
The rocker lock hand release designed for use with the CR711 rod is pictured above.
rl327s
square top notched rod application
cr711
CR712
Our standard notched offset top crib rod.  This type of rod is used with a hand release system only. PLEASE NOTE: These rods are not left and right, they are not designed for use with the pull button hand release for drop sides. They are designed for use with hand releases such as the rocker lock design. Two rods are required for each moving side. Crib rods are supplied with all necessary attaching fasteners.
ppe70735bc.png
The rocker lock hand release designed for use with the CR712 rod is pictured above.
rl327s
offset top notched rod application
cr712
ppf1816f5f.jpg
Products America has several different lengths and styles of crib rods available.  If you are unsure of which rod you need please call us for direct assistance at 800.205.9642 or 800.772.1041.  It will be helpful for you to be with the crib when you call since we will need to ask you a few specific questions about the crib in the interest of safety.
notched crib rod and hand release application
HINT: Not sure if your crib uses a hand release?  A hand release system would be located underneath the top rail of the moving side at each end, usually directly underneath the holes that the crib rods will slide through.  
General Information on Crib Rods
Printable Document
pp42021e31.png
HINT:
Q: “How do I know if my crib side drops with a hand or foot release system?”
A: Check on the inside of the center of the bottom rail of the moving side for two metal plates (gate shoes), or wood screw holes where gate shoes may have been attached originally. If the gate shoes and/or holes are present, you may have a foot release system design crib.  A hand release system would instead be located underneath the top rail of the moving side at each end, usually directly underneath the holes that the crib rods will slide through.  
If you are not sure which type of release system your crib has please call Products America for direct assistance at (800)205-9642 or (800)772-1041.
pp7f468105.png
pp1cb9ee00.png
ppfd041a28.png
PRODUCTS AMERICA
pp66ef81f1.png
pdficon_large.gif